Description

Glysofor EVO N is an environmentally-friendly antifreeze concentrate and heat transfer medium based on monoethylene glycol in combination with biodegradable corrosion inhibitors.

Glysofor EVO N is used in heating and cooling systems, heat pumps, or other water circuits which are susceptible to frost, and combines the advantages of a MEG-based antifreeze with the optimised biodegradability of the additives it contains.

Free of nitrite, borate, phosphate, triazole, and silicate.

It was specially developed for application areas which have particular environmental requirements, especially in respect of biodegradability, while also focusing on physical characteristics such as heat conductivity and viscosity.

Glysofor EVO N is formulated such that, in the event of unintentional release (e.g. by a leak), the microbial breakdown of the ingredients is not expected to be hindered. Specifically, the good rates at which the ingredients biodegrade into the pure substance is not negatively impacted by the combination of substances in the recipe. Extended half-life periods or an accumulation of persistent intermediate degradation products are also not anticipated during the biodegradation of Glysofor EVO N.

Typical areas of application

Heating and cooling systems, heat pumps, or other water circuits susceptible to frost.

Packaging sizes

  • 25 kg / 30 kg PE canister
  • 220 kg Barrel
  • 1.000 kg IBC
  • 24.000 kg Tank vehicle
Spezifikation

The thermodynamic properties and other specific product features available to download in PDF format.

Antifreeze protection

depending on the concentration

Prevents freezing down to -9 °C at 20%
Prevents freezing down to -16 °C at 30%
Prevents freezing down to -25 °C at 40%
Prevents freezing down to -38 °C at 50%
Prevents freezing down to -51 °C at 58%

Further information

The corrosion inhibition of Glysofor EVO N is completely free of nitrite, nitrate, borate, phosphate, triazole, and silicate. Glysofor EVO N is used simultaneously as an antifreeze, corrosion protection agent as well as the heat transfer medium. Glysofor EVO N ideally prevents frost damage, corrosion, deposits, sludge accumulation, and biofilms. Glysofor EVO N is biodegradable, environmentally friendly and, in water circuits, exhibits longterm resistance to the formation of biofilms, rot, and microbiological decomposition, which avoids deposition and sludge accumulation. Homogeneous Glysofor EVO N/water mixtures do not separate, which ensures continuous frost resistance. This guarantees year-round, longterm, and low-maintenance operation of the system.

Chemical name Ethylene glycol (monoethylene glycol), aqua dest., anti-corrosion additive
Appearance Pink liquid
Packaging Canisters / barrels / IBCs / tank vehicles
ADR KI 0 Ziff
WHC 1
Labelling GHS 07 GHS 08

GHS 07 – H302, GHS 08 – H373

Heat transfer medium

In heating systems, heat pump systems, heat recovery plants, industrial plants, or water circuits Glysofor EVO N is used as a heat transfer fluid. It guarantees optimum heat transmission from a heat generator to a heat consumer within a water circuit.

Cooling brine / Cooling medium

In industrial cooling systems, Glysofor EVO N is used as a cooling brine. Glysofor EVO N is used to transfer cold from a central refrigeration system to different cooling consumers. Typical application areas are air-conditioning systems or cooling equipment in industrial and production facilities. Thanks to the excellent ability of Glysofor EVO N to lower the freezing point, refrigeration and deep freeze systems can be safely operated at sub-zero temperatures at low as -30°C.

Antifreeze

Using glycol, in this case monoethylene glycol, Glysofor EVO N significantly lowers the freezing point of water. In this way, Glysofor EVO N ensures that the aqueous solutions remain in workable liquid form, even in sub-zero temperatures. With Glysofor EVO N, heating, cooling, and water circuits can be temporarily switched off, even during frost conditions, while however remaining ready for operation at any time. Glysofor EVO N reliably avoids bursts caused by frost, which also result in damage to the system.

Corrosion protection

Glysofor EVO N contains a combination of corrosion inhibitors, which provide optimal corrosion protection for metals. All of the corrosion inhibitors used are classed in the lowest water pollution class 1 and have optimum biodegradability. The use of nitrate, nitrite, phosphate, borate, silicate, and triazole was consciously dispensed with in the formulation of Glysofor EVO N.

Other information

Pure water/glycol mixtures have very clearly pronounced corrosive properties. You should therefore never use pure water/glycol mixtures with no inhibitors. For the corrosion inhibitors it contains to be fully effective, Glysofor EVO N must be used in a concentration of at least 20% vol.; this gives frost resistance down to – 9°C.

Thermodynamic properties

Temp.

[°C]
Thermal cond.

[W/m K]
Spec. heat

[kJ/kg K]
Density

[g/cm3]
Kin. viscos.

[mm2/s]
Cub. expan. coeff.

[K-1]
Rel. press.

[Factor]
0 0,490 3,92 1,035 3,34 0,00021 1,28
10 0,501 3,96 1,032 2,44 0,00028 1,16
20 0,512 3,99 1,029 1,82 0,00034 1,07
30 0,523 4,02 1,025 1,40 0,00039 1,00
40 0,535 4,04 1,021 1,11 0,00045 0,95
50 0,546 4,06 1,016 0,90 0,00050 0,90
60 0,557 4,07 1,010 0,75 0,00055 0,87
70 0,568 4,08 1,005 0,64 0,00059 0,84
80 0,580 4,08 0,998 0,57 0,00063 0,81
90 0,591 4,09 0,992 0,51 0,00067 0,78
100 0,602 4,08 0,985 0,47 0,00071 0,76
Temp.

[°C]
Thermal cond.

[W/m K]
Spec. heat

[kJ/kg K]
Density

[g/cm3]
Kin. viscos.

[mm2/s]
Cub. expan.coeff.

[K-1]
Rel. press.

[Factor]
-10 0,458 3,82 1,046 5,51 0,00022 1,49
0 0,469 3,86 1,044 3,86 0,00027 1,34
10 0,479 3,90 1,040 2,78 0,00033 1,22
20 0,490 3,93 1,037 2,06 0,00038 1,13
30 0,501 3,96 1,032 1,57 0,00043 1,05
40 0,511 3,99 1,028 1,23 0,00047 1,00
50 0,522 4,01 1,022 0,99 0,00052 0,94
60 0,533 4,02 1,017 0,82 0,00056 0,90
70 0,544 4,04 1,011 0,70 0,00061 0,87
80 0,554 4,04 1,004 0,62 0,00065 0,83
90 0,565 4,04 0,998 0,56 0,00069 0,80
100 0,576 4,04 0,990 0,51 0,00072 0,77
Temp.

[°C]
Thermal cond.

[W/m K]
Spec. heat

[kJ/kg K]
Density

[g/cm3]
Kin. viscos.

[mm2/s]
Cub. expan.coeff.

[K-1]
Rel. press.

[Factor]
-10 0,438 3,73 1,056 6,43 0,00028 1,58
0 0,448 3,78 1,052 4,45 0,00033 1,39
10 0,458 3,82 1,049 3,17 0,00037 1,28
20 0,468 3,86 1,044 2,33 0,00041 1,18
30 0,479 3,89 1,040 1,76 0,00045 1,10
40 0,489 3,92 1,035 1,37 0,00049 1,04
50 0,499 3,94 1,029 1,10 0,00053 0,98
60 0,509 3,96 1,024 0,90 0,00057 0,93
70 0,519 3,97 1,017 0,77 0,00061 0,89
80 0,530 3,98 1,011 0,67 0,00064 0,85
90 0,540 3,98 1,004 0,61 0,00068 0,82
100 0,550 3,98 0,997 0,56 0,00071 0,79
Temp.

[°C]
Thermal cond.

[W/m K]
Spec. heat

[kJ/kg K]
Density

[g/cm3]
Kin. viscos.

[mm2/s]
Cub. expan. coeff.

[K-1]
Rel. press.

[Factor]
-20 0,414 3,52 1,068 12,49 0,00030 1,84
-10 0,423 3,58 1,064 8,18 0,00034 1,62
0 0,431 3,64 1,061 5,48 0,00037 1,44
10 0,440 3,69 1,056 3,79 0,00041 1,32
20 0,449 3,73 1,052 2,71 0,00044 1,22
30 0,458 3,76 1,047 2,00 0,00047 1,13
40 0,466 3,81 1,042 1,53 0,00050 1,06
50 0,475 3,84 1,036 1,20 0,00053 1,00
60 0,484 3,86 1,030 0,98 0,00056 0,95
70 0,493 3,88 1,024 0,83 0,00059 0,91
80 0,501 3,89 1,018 0,72 0,00062 0,87
90 0,51 3,90 1,012 0,65 0,00065 0,83
100 0,519 3,91 1,005 0,60 0,00067 0,80
Temp.

[°C]
Thermal cond.

[W/m K]
Spec. heat

[kJ/kg K]
Density

[g/cm3]
Kin. viscos.

[mm2/s]
Cub. expan. coeff.

[K-1]
Rel. press.

[Factor]
-20 0,400 3,34 1,077 17,09 0,00036 1,91
-10 0,407 3,41 1,073 10,59 0,00038 1,67
0 0,415 3,47 1,068 6,84 0,00041 1,49
10 0,422 3,53 1,064 4,57 0,00044 1,37
20 0,430 3,58 1,059 3,18 0,00046 1,27
30 0,437 3,63 1,054 2,30 0,00048 1,17
40 0,445 3,67 1,049 1,72 0,00051 1,09
50 0,452 3,71 1,043 1,33 0,00056 1,03
60 0,460 3,74 1,037 1,07 0,00058 0,98
70 0,467 3,77 1,031 0,90 0,00062 0,93
80 0,475 3,79 1,025 0,78 0,00065 0,89
90 0,482 3,80 1,019 0,71 0,00068 0,85
100 0,490 3,81 1,013 0,66 0,00072 0,82
Temp.

[°C]
Thermal cond.

[W/m K]
Spec. heat

[kJ/kg K]
Density

[g/cm3]
Kin. viscos.

[mm2/s]
Cub. expan. coeff.

[K-1]
Rel. press.

[Factor]
-30 0,376 3,09 1,090 38,99 0,00039
-20 0,383 3,18 1,085 21,09 0,00041 1,98
-10 0,390 3,25 1,081 12,29 0,00043 1,73
0 0,397 3,32 1,076 7,74 0,00044 1,55
10 0,404 3,39 1,071 5,15 0,00046 1,41
20 0,411 3,45 1,066 3,61 0,00048 1,31
30 0,417 3,5 1,060 2,63 0,00050 1,21
40 0,424 3,55 1,055 1,99 0,00053 1,13
50 0,431 3,60 1,049 1,55 0,00055 1,06
60 0,438 3,64 1,043 1,25 0,00058 1,01
70 0,445 3,67 1,037 1,04 0,00060 0,96
80 0,452 3,70 1,030 0,90 0,00063 0,92
90 0,459 3,72 1,024 0,79 0,00065 0,88
100 0,466 3,74 1,017 0,73 0,00068 0,84
Temp.

[°C]
Thermal cond.

[W/m K]
Spec. heat

[kJ/kg K]
Density

[g/cm3]
Kin. viscos.

[mm2/s]
Cub. expan. coeff.

[K-1]
Rel. press.

[Factor]
-30 0,361 2,96 1,099 54,19 0,00045
-20 0,367 3,04 1,094 26,19 0,00045 2,05
-10 0,374 3,12 1,088 14,39 0,00046 1,79
0 0,380 3,19 1,083 8,83 0,00048 1,60
10 0,386 3,26 1,078 5,84 0,00049 1,45
20 0,392 3,32 1,072 4,10 0,00051 1,34
30 0,399 3,38 1,067 3,01 0,00053 1,25
40 0,405 3,43 1,061 2,29 0,00056 1,16
50 0,411 3,48 1,055 1,75 0,00058 1,09
60 0,418 3,53 1,048 1,39 0,00061 1,04
70 0,424 3,57 1,042 1,15 0,00064 0,99
80 0,430 3,60 1,035 0,96 0,00068 0,94
90 0,437 3,63 1,027 0,84 0,00072 0,90
100 0,443 3,66 1,020 0,75 0,00073 0,86
Temp.

[°C]
Thermal cond.

[W/m K]
Spec. heat

[kJ/kg K]
Density

[g/cm3]
Kin. viscos.

[mm2/s]
Cub. expan. coeff.

[K-1]
Rel. press.

[Factor]
-40 0,345 2,80 1,112 149,99 0,00047
-30 0,350 2,88 1,107 68,29 0,00048
-20 0,356 2,96 1,101 34,69 0,00048 2,20
-10 0,361 3,04 1,096 19,29 0,00049 1,92
0 0,367 3,11 1,090 11,59 0,00050 1,70
10 0,372 3,18 1,085 7,36 0,00052 1,54
20 0,377 3,24 1,079 4,95 0,00054 1,41
30 0,383 3,30 1,073 3,48 0,00055 1,31
40 0,388 3,35 1,067 2,54 0,00058 1,21
50 0,393 3,40 1,060 1,93 0,00060 1,13
60 0,399 3,45 1,054 1,52 0,00063 1,07
70 0,404 3,49 1,047 1,24 0,00066 1,01
80 0,410 3,52 1,040 1,04 0,00069 0,96
90 0,415 3,55 1,033 0,90 0,00072 0,92
100 0,420 3,58 1,025 0,80 0,00074 0,87
Temp.

[°C]
Thermal cond.

[W/m K]
Spec. heat

[kJ/kg K]
Density

[g/cm3]
Kin. viscos.

[mm2/s]
Cub. expan. coeff.

[K-1]
Rel. press.

[Factor]
-50 0,335 2,68 1,122 0,00048
-40 0,340 2,76 1,117 152,99 0,00049
-30 0,345 2,85 1,111 76,99 0,00049
-20 0,349 2,93 1,106 40,99 0,00050 2,34
-10 0,354 3,00 1,100 23,09 0,00051 2,04
0 0,359 3,07 1,094 13,69 0,00052 1,79
10 0,364 3,14 1,089 8,53 0,00053 1,63
20 0,369 3,20 1,083 5,56 0,00055 1,48
30 0,373 3,26 1,076 3,78 0,00057 1,36
40 0,378 3,31 1,070 2,69 0,00059 1,26
50 0,383 3,36 1,064 1,99 0,00061 1,17
60 0,388 3,41 1,057 1,54 0,00063 1,09
70 0,393 3,45 1,050 1,25 0,00066 1,03
80 0,398 3,48 1,043 1,05 0,00069 0,98
90 0,402 3,52 1,036 0,92 0,00072 0,93
100 0,407 3,54 1,028 0,83 0,00075 0,89

This data is for information purposes only and does not release from the obligation to carry out a proper material testing upon arrival. The data is based on our current state of knowledge and is not meant to guarantee specific properties. It is meant to describe our products with regard to their composition and shall offer application advice. Possible industrial property rights of third parties and the suitability for a special application purpose are to be observed and verified by the user.

Any questions?

We advise you free of charge and without obligation, so that you receive
the best product for your application.

Make an Inquiry